How to fix a 24ports Switch issues in a Rack

Fixing, for instance the different kinds of switch in a network Rack can be a complicated one if care is not taken, leading to a complete mishandling and damage. In addition, it can be a bit more complex than a well pressure switch.

The following are to be taken into consideration when performing the above duties.

Step 1

Identification of issues around the device

1. Are all ports affected or just a few of them?
2. Are there any errors as in lights or alarms on the switch?
3. Have you recently made any changes in the few days to the entire network or the switch configurations?

Step 2

Power Cycling of the entire switch

The user must make sure to turn off the switch by just unplugging the power cable or the cord at the back of the device. In addition to this or right after removing the power cable, wait for at least 30seconds before slotting the cable back to its ports. This resolves most issues.

Step 3

Check the cables and connections well

Ensure to verify that all cables inclusively connections are securely connected to the correct ports on the entire switch and other related devices. You can also check for the following issues as needed ones:

1. Loose or damaged network cables(LAN/WAN)
2. Incorrectly connected cables, for example, the crossover cables instead of straight through/line)
3. You can also check for a faulty or worn RJ-45

Step 4

Checking the switch’s proper configurations

The user should ensure to log in to the switch management console or interface, which is always a web-based or even a command-line interface, to:

1. Verify the configurations and other setups including the VLAN settings, the ports assignments and even the spanning tree protocol settings
2. Also, checking for the firmware updates, applying the necessary patches.
3. With the aforementioned, the user must also review the system logs for errors and omissions or clues about the issues.

Step 5

Ensuring and isolation of PORT(s)

In case the issues is affecting the port, and still persist, the user has the right to try the below roles or tasks:

1. Swapping the cables between different ports could also be of a help
2. Moving of devices to different ports numbers to see if the problem still remains or not, however, this particular solution helps others too.

Step 6

Firmware issues

You must check for the firmware and other available updates online to ensure a full detailed updated features are well added. If the problem remains, it is advisable to restore the entire switch to it real normal factory default settings.

On the other hand, overheating has also been noted to be one of the issues affecting switches nowadays, it is recommended hat switches are well ventilated or cushioned in a well airconditioned room.

About Author

SURF

See author's posts